How To Get Water Out Of Charging Port | Definitive Guide

Tech

How To Get Water Out Of Your Charging Port

Have you ever dropped your phone in water or maybe splashed a bit of liquid into the charging port? If so, don’t panic! There are a few steps you can take to try to remove the water and potentially save your phone. Here’s a step-by-step guide on how to get water out of charging port of your iPhone or Android device.

How To Get Water Out Of iPhone Charging Port (or Android)

  1. Turn off your phone immediately and remove the battery if possible.
  2. Use a soft cloth or paper towel to gently dry the exterior of the phone.
  3. Using a small vacuum, gently suck out any water from the charging port. If you don’t have a vacuum, try using a dry cloth or a toothbrush to remove the water.
  4. Put your phone in a container with uncooked rice and let it sit for at least 24 hours. The rice will absorb any remaining moisture inside the phone.
  5. Reinsert the battery and turn on your phone to see if it’s working properly.

Other Methods:

  1. Silica Gel Packets: Silica gel packets are often used to absorb moisture and prevent mold growth. Place your phone in a container with silica gel packets and let it sit for at least 24 hours.
  2. Hair Dryer: Use a hair dryer on the lowest heat setting and hold it at least six inches away from the phone. Make sure to move the hair dryer around to avoid overheating one area.
  3. Oven Method: Place your phone in a container on top of a sheet of aluminum foil and put it in the oven on the lowest heat setting for about 10 minutes. Make sure to monitor it to avoid overheating.

How to Check if Your Phone is Dry:

  1. Check the charging port for any visible signs of water. If the port is dry, there’s a good chance your phone will work properly.
  2. Connect your phone to a charger. If the charging symbol appears, then your phone is probably dry and working properly.
  3. If you’re still unsure, you can use a multimeter to check the charging port for continuity.

Fixing False Liquid Detection Alerts:

Sometimes water damage can trigger a false liquid detection alert on your phone. If this happens, try the following steps:

  1. Turn off your phone and disconnect it from any charging sources.
  2. Use a soft cloth or paper towel to gently dry the exterior of the phone.
  3. Use a vacuum or a toothbrush to remove any water from the charging port.
  4. Put your phone in a container with uncooked rice or silica gel packets and let it sit for at least 24 hours.
  5. Reinsert the battery and turn on your phone. If the liquid detection alert still appears, contact a professional repair service.

How to Tell if it’s Too Late to Fix This Issue:

There are some cases when it’s too late to search info regarding how to get water out of charging port because it’s unfixable already. Here are some of them:

  1. If your phone doesn’t turn on or if there’s visible corrosion in the charging port, it may be too late to fix the issue.
  2. If your phone turns on, but the display is severely damaged, it’s also likely too late to fix the issue.
  3. If your phone turns on but has performance issues such as slow charging, random shut-offs, or a distorted display, it’s possible that some internal components have been damaged by the water.

What You Shouldn’t Do While the Port is Wet:

  1. Don’t turn on your phone while the charging port is wet, as this can cause a short circuit and potentially damage the phone further.
  2. Don’t use a hair dryer on high heat as this can cause further damage to the internal components of the phone.
  3. Don’t shake or hit the phone to try to remove the water, as this can cause damage to the internal components and make the problem worse.
  4. Don’t try to charge the phone while it’s still wet, as this can also cause a short circuit and further damage the phone.
  5. Don’t use a vacuum with a strong suction power, as this can cause damage to the charging port and the internal components.

Conclusion

In conclusion, if you’ve accidentally dropped your phone in water or splashed liquid into the charging port, don’t panic! There are steps you can take to try to remove the water and potentially save your phone. Make sure to turn off your phone immediately and use some of the methods described above.

FAQ

1. What should I do if water gets into my charging port?

If water gets into your charging port, it’s important to act quickly to prevent damage to your device. The first step is to turn off your device and remove the battery if possible. Then, shake out any visible water and use a soft cloth or paper towel to gently dab the area and remove any remaining moisture.

2. Can I use a hair dryer to get water out of the charging port?

Using a hair dryer to remove water from a charging port is not recommended as the heat can damage your device. It’s best to let the device air dry naturally or use a soft cloth to gently remove any moisture.

3. Is there any special equipment needed to remove water from a charging port?

No special equipment is needed to remove water from a charging port. However, using a can of compressed air can help to blast any remaining moisture out of the port.

4. What should I do if my device won’t turn on after getting wet?

If your device doesn’t turn on after getting wet, it may be because water has shorted out the battery or other components. The best course of action is to leave the device to air dry for at least 24 hours before attempting to turn it on again. If the device still doesn’t turn on, you may need to take it to a professional for repair.

5. Can water damage be repaired?

Water damage can sometimes be repaired, but it depends on the extent of the damage and the type of device. In some cases, replacing damaged components may be enough to repair the device, while in other cases the device may need to be replaced entirely. If you’re unsure, it’s best to take your device to a professional for an evaluation.